• Its carbon fiber structure makes the Ronin 2 lightweight, strong, and functional. Upgraded high-torque motors support payloads of 30 lbs.
• A new mechanical design makes camera mounting and balancing easier while optimising accuracy. New axis locks improve usability, and its extendable roll axis allows the Ronin 2 to support more cameras.
• Angular vibration is within ±0.02°, and the built-in GPS module improves the gimbal accuracy, making it extremely stabile even while shooting at high speeds.
• Adjusting settings is easier with the built-in touch panel, and it also displays the Ronin 2’s working status.
• A dual battery system and support for hot swapping allows for continuous operation when replacing batteries. With fully charged TB50 Intelligent Batteries, the Ronin 2 can power a camera and the whole system for 2.5 hours.
• Power and video signal are transmitted through the built-in slip ring. The Ronin 2 comes with several accessory ports and supports the DJI Focus system, lens hoods, wireless video downlinks, and monitors.
• Transmits signal at 2.4 GHz and 5.8 GHz to improve transmission stability.
• The brand new Ronin 2 app can adjust settings and also activate multiple intelligent features such as Track and CamAnchor.

Powerful:

Ronin 2 exists to let filmmakers capture the scene they see in their mind. Upgraded high torque motors allow it to support a wider range of cameras, resist high winds and G-forces caused when mounted to a car and keep it moving smoothly in flight.

Supported Builds:

Whether it’s a simple DSLR or a professional camera with cinema grade glass with all the accessories mounted, Ronin 2 will stabilise the build.

Higher Torque, More Power, Same Precision:

With up to eight times more powerful motors than previous iterations, the Ronin 2 can withstand sustained speeds of over 75mph with camera builds as heavy as 30lbs. We’ve increased power without sacrificing control. With encoded motors and extreme precision, the same 0.02° of accuracy remains.

Accessory Support:

With the new Ronin power hub, essential accessories such as DJI Focus and wireless video transmission systems could gain power and communicate data with Ronin 2.

Versatility:

A newly designed detachable Grip allows Ronin 2 to stand up on its own and is easily separated when the lower part of the hand grip is not needed. Ronin 2 is also highly compatible with cable cams, drones, cranes, Steadicams and more.

Easy:

The simplicity of Ronin has been amplified with Ronin 2, making setup and use easier than ever. Everything, from mounting cameras to balancing and tuning, powering accessories and transportation has been tweaked and refined for ease and speed.

Integrated screen:

A dedicated ultra-bright touch screen for settings and adjustments has been integrated into the Ronin 2, streamlining and accelerating gimbal setup. Tactile buttons including motor pause are now easily within reach.

Intuitive software:

The extensively refined, redesigned and expanded Gimbal Assistant app, helps to create content with minimum effort via new features such as CamAnchor, Time-lapse, and Panorama, providing a more intuitive and easier to use full control system for the Ronin 2.

Intelligent:

Enhanced intelligence means filmmakers can get shots with Ronin 2 that would once have needed specialist expertise or additional equipment, from total smoothness control to studio-oriented smart features.

Integrated:

Power systems are now tightly integrated into Ronin 2, capable of powering its motors and the attached camera and accessories without dangling cables or multiple power systems. As it uses a dual battery system, filmmakers can hot swap to keep the camera and accessories powered and maximize shooting time.

Hot-Swap Batteries:

Two batteries on the Ronin 2, and the ability to run with only one allows batteries to be charged and swapped without interrupting a shoot.

Accessory Powering:

Installed cameras, monitors, or accessories, including the DJI Focus, can be powered by the Ronin 2 batteries through integrated cabling and ports, eliminating dangling cables.

Reliable:

Every element of Ronin 2 has been designed to maximize reliability, from materials to the splash-proof enclosed motor design, cable management, and redundancy. All of this creates a system that shines in the most demanding of shooting environments.

Carbon Fibre Build:

A carbon fibre build enables Ronin 2 to perform well in extreme weather conditions. Light and durable, it is reliable in the most testing scenarios.

• GoPro USB-C Charge Cable x2
• GoPro Wall mains charger
• USB A to Micro B (for controller)
• 3mm Allen Key
• 4mm Allen Key
• 3/16" Allen Key
• Hook and Loop Straps x3
• Fabric Bag (for small Accessories)
• Bag of 12x M4-10 Screws
• Bag of 4x M4-14 Screws
• Bag of 5x 3/8-16 Screws
• Bag of 5x 1/4-20 Screws
• 12x Counter Weight Thumb Screws
• Ronin 2
• Ronin 2 Upper Grip
• Ronin 2 Lower Grip
• Ronin 2 Top Handle
• Ronin 2 Handle Grip x2
• Ronin 2 Remote Controller
• TB50 Intelligent Battery x6
• Dual TB50 Battery Mount
• TB50 Battery Mains Unit
• Ronin 2 Quad Charging Hub
• Ronin 2 Power Hub
• Short Camera Top Cross Bar (R2-002)
• Long Camera Top Cross Bar (R2-009)
• Camera Base Plate (R-2001)
• Ronin 2 Accessory Mount
• 15mm Focus Rod Mount (R2-003)
• Ronin 2 Universal Mount
• Top Mounting Block
• Ronin 2 Motion Block
• Ronin 2 Flight Case
• 180g Ronin 2 Part 45 Counter Weight x2
• 270g Ronin 2 Part 45 Counter Weight x4
• Counter Weight Mounting Plate
• Thumb Controller For Ronin 2/w Mount
• Extended Camera Base Plate (R2-008)
• Cinemilled Universal Mount for Ronin 2(CM-022)
• Cinemilled Ronin 2 Control Panel(CM-2100)
• Cinemilled Mitchell Wrench (CM-105)
• Cinemilled Universal Gimbal Dock Tool(CM-1251)
• Cinemilled Mitchell Washer & 3/8 Tie Down Knob(CM-104)
• Cinemilled Mitchell Threaded Collar/ Castle Nut(CM-103)
• Hawk-Woods Lemo 6P- 30CM- XLR 4(LA-100)
• Hawk-Woods Lemo 6P-30CM-Sony(LA-101)
• Hawk-Woods Lemo 6P-30CM(LA-102)
• Hawk-Woods Lemo 6P-30CM(LA-103)
• Hawk-Woods Lemo 6P- 30CM(LA-104)
• Hawk-Woods Lemo 6P-30CM(LA-105)
• Hawk-Woods Lemo 6P-30CM(LA-106)
• Cinemilled Upper Tilt Arms Extension (CM-603) x2
• Cinemilled Upper Tilt Arms Extension (CM-604) x2
• Canbus to 5.5mm Power Cable
• ARRI Start/Stop Cable
• SDI OUT Cable
• SDI IN Cable
• Triple P-Tap Breakout Box
• USB - Micro USB charge cable
• USB Mains Charger
• Right Angled Mini to full HDMI
• Light weight 0.7m HDMI
• Light weight BNC (75cm +) x3
• USB3 Multi Card Reader
• USB 3 A - Micro B Cable (Blue End)
• 64GB SDXC IN CASE
• Short BNC 75ohm (1m) x2
• Medium BNC 75ohm (5m)
• BNC Barrel 75ohm x3
• Right Angled BNC Adaptor x5
• Sony NPF Charger & IEC C7 (Fig 8)
• Sony NPF 970 Battery x2
• D-Tap (Male) to Splitter Cable (4x Female) (PC-11)
• CineMilled Universal Gimbal Dock (CM-1250)
• Commlite 7” Magic Arm (CS-MA07) x2
• Micro Peli 1055 (24x18x3cm)
• Medium Peli 1450  - (41x33x17cm)